Members mlamarche Posted September 3, 2009 Members Share Posted September 3, 2009 I'm getting a lot of high gain hiss from my JMP1 preamp....Trying to use the Hush feature in the Replifex, but I dont understand the manual...every value is a negative (ie: -25) ...I tried adjusting all the way to the left and all the way to the right but it seems that the Hush is not doing anything ...any help would be appreciated ...using the replifex in the loop of the JMP1 ...running it mono ...tried stereo but it does the same thing....nothing....thanks Link to comment Share on other sites More sharing options...
Members Yek Posted September 3, 2009 Members Share Posted September 3, 2009 Besides setting HUSH to ON, you have to set the mixer settings to POST. Link to comment Share on other sites More sharing options...
Members mlamarche Posted September 4, 2009 Author Members Share Posted September 4, 2009 also...am I connecting this unit correctly?...the JMP1 has 1send 2 returns..so I run a Y cable from the send to the 2 i/p's in the replifex then 2 cables from the o/p's of replifex into JMP1's left and right returns... Link to comment Share on other sites More sharing options...
Members TheGrooveking Posted September 18, 2009 Members Share Posted September 18, 2009 What db setting to you have it set to? -10db or +4db? TheGrooveking Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.