Members Unalaska Posted January 31, 2015 Members Share Posted January 31, 2015 Yeah, damn Craigslist. I actually traded some gear for it so I'm happy. But I need some small parts. A fader cap and 7-8 eq/aux knobs. Any idea where to get parts? Link to comment Share on other sites More sharing options...
Members agedhorse Posted January 31, 2015 Members Share Posted January 31, 2015 A&H parts should still have them in stock Link to comment Share on other sites More sharing options...
Members Unalaska Posted January 31, 2015 Author Members Share Posted January 31, 2015 There is one distributer listed in their site, full compass has 3 or so knob caps listed for this series. Should I go through an authorized repair center or contact the distributor since A&H is based in the UK. Link to comment Share on other sites More sharing options...
Members Pro Sound Guy Posted January 31, 2015 Members Share Posted January 31, 2015 http://www.allen-heath.com/media/GL3-SPARES.pdf Link to comment Share on other sites More sharing options...
Members dennis a Posted January 31, 2015 Members Share Posted January 31, 2015 There is one distributer listed in their site, full compass has 3 or so knob caps listed for this series. Should I go through an authorized repair center or contact the distributor since A&H is based in the UK. [h=1]distributors in USA[/h] [h=2]American Music & Sound[/h] 925 Broadbeck Drive Suite 220 Newbury Park CA 91320 Tel: 800-431-2609 Website: www.americanmusicandsound.com/ Link to comment Share on other sites More sharing options...
Members Unalaska Posted February 1, 2015 Author Members Share Posted February 1, 2015 Subgroup 2 has some issues with it. Maybe I'll open it up and see but I need to play with if more and nail down the problem. Looks like the board was made in 94, sold for about what the current GL does now. Link to comment Share on other sites More sharing options...
Members dennis a Posted February 1, 2015 Members Share Posted February 1, 2015 Subgroup 2 has some issues with it. Maybe I'll open it up and see but I need to play with if more and nail down the problem. Looks like the board was made in 94, sold for about what the current GL does now. What are the issues? Link to comment Share on other sites More sharing options...
Members Pro Sound Guy Posted February 1, 2015 Members Share Posted February 1, 2015 Pull all the cables and reseat them internally. Oxidation has more then likely taken placeand would be good for the over all performance to reseat all connections inside of the unit. Link to comment Share on other sites More sharing options...
Members Unalaska Posted February 2, 2015 Author Members Share Posted February 2, 2015 I didn't have a lot of time but I powered it up and just pfl'd a few things without passing audio. The subgroup 2 meter will go into the red briefly when the fader is even touched. There isn't much to say until I pass audio through it so stay tuned... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.