Members mkfs9 Posted September 20, 2014 Members Share Posted September 20, 2014 Hi, strange problem last night no output when both channels connected but each channel works on its own. Used one channel and daisy chained sub's to get by and thoughts on this one. Link to comment Share on other sites More sharing options...
Members Pro Sound Guy Posted September 20, 2014 Members Share Posted September 20, 2014 Double check all the DIP switch settings. Make sure the thing is not in bridge or parallel mode and is set for stereo mode. Link to comment Share on other sites More sharing options...
Members agedhorse Posted September 20, 2014 Members Share Posted September 20, 2014 Double check all the DIP switch settings. Make sure the thing is not in bridge or parallel mode and is set for stereo mode. Agreed, almost certainly the issue. Maybe one of the dip switch pairs is set wrong for the operating mode. Link to comment Share on other sites More sharing options...
Members mkfs9 Posted September 21, 2014 Author Members Share Posted September 21, 2014 All setting were Ok so mystery. It was Ok today when we used it.checked and tightened all speakons too. Link to comment Share on other sites More sharing options...
Members mkfs9 Posted September 21, 2014 Author Members Share Posted September 21, 2014 Do they have a safe mode Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.