Members Tam Burello Posted January 3, 2008 Members Share Posted January 3, 2008 Hey,I'm very interested to put a killswitch on my ibanez G470...In some other posts i've red that i need two volumes, but my ibanez have only one volume pot...how i can install a two-way switch on guitar? thanks Link to comment Share on other sites More sharing options...
Members bengerm77 Posted January 3, 2008 Members Share Posted January 3, 2008 http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=kill_switch Link to comment Share on other sites More sharing options...
Members John Busbee Posted January 3, 2008 Members Share Posted January 3, 2008 don't forget to engage it. Link to comment Share on other sites More sharing options...
Members Tam Burello Posted January 3, 2008 Author Members Share Posted January 3, 2008 wow bengerm...this helped me a lot thanks!! Link to comment Share on other sites More sharing options...
Members Tam Burello Posted January 3, 2008 Author Members Share Posted January 3, 2008 I wonder if does exist a guide step-to-step to do this job....don't know if i can do a hole in my guitar help meeee Link to comment Share on other sites More sharing options...
Members bengerm77 Posted January 4, 2008 Members Share Posted January 4, 2008 it is an unfontunate thing but it has to be done.I recently put a hole in my brand new Kramer Baretta reissue, and when I first punched through the wood I thought I destroyed my guitar forever. Long story short, it turned out perfectly fine and I don't regret doing it for a second. Link to comment Share on other sites More sharing options...
Members munkie Posted January 4, 2008 Members Share Posted January 4, 2008 I've been looking into this recently. did plan on doing an on/off/on kill switch but there's no clear wiring diagram for this. I al so didn't like the idea on not having that safety part just incase it was knocked by accident. I've decided (and test) a button kill switch. just seems more appropriate for my use. Link to comment Share on other sites More sharing options...
Members Kerzeck Posted January 4, 2008 Members Share Posted January 4, 2008 I don't think this will work. :poke: Link to comment Share on other sites More sharing options...
Members cloudscapes Posted January 4, 2008 Members Share Posted January 4, 2008 yeah that'll work Link to comment Share on other sites More sharing options...
Members munkie Posted January 5, 2008 Members Share Posted January 5, 2008 should do. it's grounding the signal (i know that works because I've had ground connection touch a hot wire before). it's a push to make switch used. Link to comment Share on other sites More sharing options...
Members kyrreca Posted January 13, 2008 Members Share Posted January 13, 2008 That will definitely work. I installed one on my RG1570, using that exact picture as a guide. Works like a charm. Link to comment Share on other sites More sharing options...
Members gappa Posted January 31, 2008 Members Share Posted January 31, 2008 Just curious- my guitar only has one volume and one pickup. I wanna replace the volume with a kswitch. Is the wiring scheme from pickup to switch any different in this case than the Duncan wiring scheme? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.