ggr1

Up for sale is this Easy-laser XT700 laser Shaft Alignment Tool System in superb working condition, well handled and maintained.

Get precise laser shaft alignment with the Easy-Laser XT770 tool set. This top-of-the-line equipment is perfect for businesses and industries looking for reliable and accurate results.

The set comes with a display unit and IR camera for easy alignment and measurement. With its trusted brand name, Easy-Laser, you can be confident in the quality and performance of this tool.

Whether you're working on large industrial machines or small motors, the Easy-Laser XT770 is the perfect tool for the job.

This unit is in perfectly working order and ready to be used for job.
Asking Price: USD$20,000 OBO

Kindly contact me by sending a message or via mail for faster response
equipments at protonmail dot com

Thank you for looking.

Make a reasonable offer for this

Make me a sweet offer and it will be heading your way, let me know.

This is still available for sale

If you are keen contact me, thanks.

A reasonable offer would be accepted, let me know. Thanks!

Available for sale with a reduced price $34K OBO, thanks

A reasonable offer would be accepted, thanks.

BUMP

Bump

If you are keen on this let me know, priced reduced $15K OBO. Thanks

Offered for sale is this Anritsu MT8220T BTSMaster Cable, Antenna, Spectrum Analyzer. It is in great condition and is guaranteed fully functional.

The options below are installed:

10--Internal bias-tee to power up Tower Mounted Amplifiers (TMA) for testing when off-line
25--Interference Analyzer
27--Channel Scanner
883--LTE/LTE-A FDDTDD Measurements
884--CDMA/EV-DO Measurements
OSLN50-1 Open/Short/Load Calibration Device.

Anritsu MT8220T BTS Master Base Station Cable and Antenna Analyzer to 7.1GHz

The BTS Master MT8220T is a handheld base station analyzer that has been specifically developed to advance the support for 4G wireless networks as well as installed 2G, 3G, and WiMAX networks. The MT8220T provides 20 MHz bandwidth modulation quality for LTE eNodeB testing and is equipped with a high-contrast, touch screen display and backlit key panel making it simple to use in both bright sunlight and dim conditions.

Cable and Antenna Analyzer Highlights of the Anritsu MT8220T include:

Measurements: RL, VSWR, Cable Loss, DTF, Phase, Gain
2-port Gain Measurement Uncertainty: < 0.45 dB
2-port Dynamic Range: > 100 dB • RF Immunity: +17 dBm on-channel, +10 dBm on-frequency
Calibration: OSL and FlexCal™ • Bias Tee: 32 V internal
Spectrum Analyzer and Interence Analyzer Highlights of the MT8220T include:

Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Field Strength, Spectral Emissions
Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID
Dynamic Range: > 95 dB in 1 Hz RBW • DANL: –163 dBm in 1 Hz RBW
Phase Noise: –100 dBc/Hz @ 10 kHz offset
Frequency Accuracy: ± 2.5 × 10–8 with GPS On
Burst Detect™ Sweep Mode: sweep 1000x in 15 MHz span
Coverage Mapping: plot RSSI to on-screen map
Interference Mapping: on-screen mapping with triangulation.

This unit is in excellent working condition and it is ready to be used for work,

Price: USD$15,500.00 OBO

If you are interested kindly contact me via email for faster responses
equipments at protonmail dot com

Thanks for looking.

I'm putting this for sale a 2020 Collings OM2H T Guitar, Near mint condition. The Traditional Series with pre-war bracing and nitro body finish combines traditional features with state-of-the art craftsmanship. The premium Sitka Spruce top and East Indian Rosewood combine to deliver great, traditional tone. With a 1 ¾” nut and drop-in saddle.

Specifications:

Handedness: Right-Handed
Type: Acoustic Guitar
Body Type: Orchestra Model
String Configuration: 6 String
Neck Material: Honduran Mahogany
Brand: Collings
Series: 2H T
Model Year: 2020
Body Material: Rosewood, Spruce
Model: Collings CJ
Set Includes: Hardshell Case

Top Wood : Sitka Spruce 
Back and Sides : Indian Rosewood 
Body Shape : OM 
Nut Width : 1 3/4" 
Scale Length : 25.5" 
String spacing at the saddle: 2 5/16.

Lovely sound and playability -- for anyone in the market for an OM2H, this guitar is a fantastic buy!

Asking Price: USD$5,350.00

If you want it, do reach me via PM or email
equipments at protonmail dot com

Thanks for looking...!!!!

Up for sale is a 2017 Mercedes-Benz G550 G Wagon V8 in sperb condition.

Absolutely Beautiful, Reliable, Desirable G Wagon. Here is your change to have a G550 for a deal! Get into a 200K dollar looking Mercedes for less then half!

It has Only 34,308 Miles! This Mercedes-Benz G-Class boasts a Twin Turbo Premium Unleaded V-8 4.0 L/243 engine powering this Automatic transmission. Wheels: 19" 5-Spoke, Valet Function, Trip Computer.

This Mercedes-Benz G-Class Comes Equipped with These Options *Transmission: 7G-TRONIC Automatic, Transmission w/Driver Selectable Mode and TouchShift Sequential Shift Control w/Steering Wheel Controls, Tracker System, Towing Equipment -inc

Trailer Sway Control, Tires: P275/55R19 AS, Tire Specific Low Tire Pressure Warning, Tailgate/Rear Door Lock Included w/Power Door Locks, Streaming Audio, Solid Axle Rear Suspension w/Coil Springs, Smart Device Integration.

Features:

VIN (Vehicle Identification Number): WDCYC3KF6HX2776**
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Drive Type: 4WD
Options: Sunroof, 4-Wheel Drive, Leather Seats
Number of Cylinders: 8
Interior Color: Black
Power Options: Air Conditioning, Power Locks, Power Windows
Mileage: 34308

This G550 was purchased in January 10th 2018, and its still in superb condition. When I inspected the car I saw absolute NO damage, My inspection paid off! When I got the car home I brought it to my local Mercedes dealer and had the small damaged fixed for $4400 dollars! Absolutely amazing deal! I have had ZERO problems with the car since. All services and recalls have been done at the dealer since.

This is an absolutely flawless G550, All scheduled maintenance had been done and it has new tires 3,000 miles ago. Current Mileage is 34,308 and will not be driven if sold.

Asking Price: $65,500.00 USD No lowballs please.

If you are interested kindly send me a message via PM or email:
equipment at protonmail dot com

Thanks for looking...!!!!!
 

Up for sale is this Parasound Halo JC5 Amplifier It comes complete with all accessories, manual, packaging. The greatest stereo power amplifier Parasound has ever made.

Designer John Curl's tour de force: 400 Watts per channel into 8 Ohms, 600 Watts per channel into 4 Ohms, stable into 1.5 Ohm impedance dips. Bridgeable into 1200 Watt mono. 

Ultra-high bias Class A/AB operation. Balanced and single-ended inputs. One of the finest high-powered amps you can buy.

No marks or scratches anywhere on the beautiful silver and grey faceplate and chassis. It has Low hours, and it works flawlessly.

Also includes all accessories including optional rack faceplate attachments, and massive 12AWG power chord, and manual. Everything looks like new. This is a current product.

Retail price is $6,500.00

If you want it make me a reasonable offer via PM or send email
equipments at protonmail dot com

Thanks...!!!

For sale is a Model 55 MiniJector Electro-Matic injection molding machine, it uses a reciprocating screw plasticizing injection unit. 

The machine utilizes the same self-clamping “V” mold system used on plunger type MiniJectors but rather than depending on injection ram force the Model55 uses an independent short stroke hydraulic cylinder to generate that force.

This permits full clamp force independent of injection pressure, Excellent lab machine new cost over 40K

This Model55 requires only 230-volt single phase power and requires no more 3.5 sq. ft of bench space. It has a self-contained hydraulic power unit with a 5.4-gallon reservoir with 2 HP 1725 RPM motor driving a 2.3 GPM gear pump.

Manual adjustments are provided for screw speed, back pressure, and injection pressure, and injection speed.

MINIJECTOR Injection Molding Machines represent more than 40 years of experience in designing and building quality, plastic injection molding machinery. 

More about the machine:

700 °F MAX HEAT
7.00” x 3.00” x 2.125”  MAX MOLD
1ounce INJECTION
TYPE Hydraulic
CLAMPING PRESSURE (TONS) 11.75
MAX INJECTION PRESSURE (PSI) 16,593
220 V Single Phase
20.5” x 27.0” x 45.0” Machine Diamensions
Reciprocating screw
Manual setpoint adjustment
Three heating zones

Specifications
(Specifications may change without notice)

                                    55-1          55-2
Screw Diameter-inches                .875          1.125
Screw Stroke-inches                 3.0          4.00
Screw displacement-cubic inches     1.80          3.98
Maximum shot size-ounces polystyrene    1.0          2.15
Maximum Injection Pressure PSI          16,065          16,593
Screw L/D (no. of turns)           15:1          15:1
Maximum Screw RPM                    172          106
Maximum Screw Torque-Lb. Inch            852          1765
Plasticizing Capacity-lbs per hour    17.5          18.5
Screw Recovery Rate-ounces per sec    .077         .082
Maximum Nozzle discharge rate-cubic in./sec 1.13    1.09
Barrel wattage                                2100    2700
Nozzle wattage                                 150    150
Power consumption-AMPS (230V single phase)    19.5    22.15
Approx. clamping pressure-tons             11.75     
Max. recommended molding area-sq. in    6.0     
Mold ejection force -lbs            3313     
Max. mold size W x L x H-in          2.13 x 7 x 3     
Pump Delivery-GPM                      2.3     
Motor HP @ 1725 RPM                       2.0     
Reservoir capacity-gals.               5.4     
Hydraulic system pressure-PSI                2050     
Machine shipping weight                         650Lbs.     
Overall dimensions W x L x H-in              20.5 x 27.0 x 45.0    

The low price of the MINIJECTOR combined with its low tooling costs, make small production runs of 100 pieces as economically efficient and practical as runs of thousands. Typical applications would be: prototypes of new or experimental parts,color mix testing, insert molding, plus traditional ATSM tensile specimens.

Insert and loose core molding can be performed economically on the MINIJECTOR.  Insert molding involves molding plastic around a metal insert or a previously molded plastic article to form a finished assembly.

Loose cores are metal forms inserted into the mold prior to molding which produce hollow portions in the finished part. 

The beauty of insert molding using the “V” molds is that the insert or loose core can be placed in the mold; the two mold halves assembled and the entire assembly held in one’s hand prior to placing in the machine. 

This permits molding around very fragile inserts that could not be safely molded using machines with high clamping pressure.

Electro-Matic carries a full line of spare parts, technical manuals and engineering suppose for these and the thousands of older MINIJECTOR machines still in use after many years of satisfactory service

Its going for asking $35,500 USD  but I'm open to a reasonable offer from a serious buyer.

If you want it do kindly send me a PM or reach me via mail
equipments at protonmail dot com

Thank you for looking.........!!!

Priced reduced its now going for $2650 now

Now going for $2900

Now $5900 for quick sale

Reasonable offers only as this is still available to be shipped out, let me know.

This is available and open to offers

I'm putting up for sale a Bose Lifestyle 650 Home Theater System, it comes with Omnijewel Speakers all in superb working order.

Great product with great technology, Sound is great. More about the Home theater system below: 

Type: Home Theater Speaker System
Features: Bluetooth, Remote Control
Smart Home Compatibility: Alexa
Shape: Cube
System Configuration: 5.1 Channel
RMS Power: 650 W
Connectivity: Wireless, Bluetooth, Wired, HDMI
Color: Black
Audio Inputs: Digital Coaxial RCA, Digital Optical TOSLINK, HDMI
Compatible Brand: For Apple, For Bose

Asking $3850 OBO

Excellent sound; high quality components; may take getting used to streaming media via TV, cable, internet.

If you are interested, do send me a PM or email:
equipments at protonmail dot com

Thanks you for your time...!!!

Yes it is still available for sale.

Hello,

I have up for sale a Marshall YJM100 Yngwie Malmsteen Signature 100 Watt Guitar Amp Head. Comes with the road case for easy transportation and handling.

Killer amp in great condition, complete with a nice heavy duty road case, original footswitch, and owner's manual.

A four-way Footcontroller (PEDL-00046) comes supplied with the YJM100, facilitating switching of Booster, Gate, Reverb and FX Loop features. This Footcontroller has been designed using Marshall Amplification' patented STOMPWARE® Technology, allowing the user to connect it to the amp using a standard 1/4 guitar cable.

Features
Output (RMS): 100/50 watt
2 channels
3 band EQ
Electronic power attenuation: 100% - 0.1%
Boost function
Noise gate
Reverb
Series effects loop
Auto bias feature
Pre-amp tubes: 4 x ECC83
Power amp tubes: 4 x EL34
Footswitch supplied

The Yngwie Malmsteen Signature YJM100 100W Tube Guitar Amp Head is a 100-watt, valve head that was developed in close conjunction with the legendary Swedish six-string shredder, Yngwie Malmsteen. The YJM offers the perfect balance of vintage tone and looks alongside modern features, which makes the amplifier the perfect players™ tool for œplug in and play recording or live performance.

The Marshall YJM100 head is wrapped in classic black levant, which is finished with gold beading, hand-cut corners and vintage script logo. In short, vintage all-tube Marshall tone and style at its best with rear panel features that deliver maximum "Malsteen tone."

Based on the power and tone of the œHoly Grail 1959 Plexi head, the YJM100 offers the ultimate Neo-Classical amp with the following cutting edge features:

1. Footswitchable* Boost with controls for Volume and Gain on the rear panel.
2. Footswitchable* Noise Gate with rear panel Threshold control.
3. Footswitchable* studio quality Digital Reverb with rear panel Level control.
4. Footswitchable* Series FX Loop
5. Half power switch which takes the output power from 100W to 50W when engaged.
6. Built-in, infinitely variable Attenuator control which can take the output stage from 100% to 0.01% and anywhere in-between, while retaining the all-important tone and feel of the all-valve power section. This means the output power can be reduced to a staggering low of 0.05 Watts when in 50W power mode.
7. Valve Failure Circuitry: meaning that if one of the output valves develops a fault, a visual indicator on the rear of the amplifier shows which one is working incorrectly. This œroadie friendly feature will save valuable time getting the amplifier back up and running again, should a valve failure occur.
8. Self-biasing circuitry to ensure proper power valve operation each time valves are changed.

Malmsteen has been a Marshall devotee from the get-go so this collaboration comes as no surprise to his countless fans. œI can™t say enough about my love for the sound, feel and look of the wall of Marshall'. Since I was 10 years old, I™ve insisted on having them behind me at all times, the guitarist reveals. œI must have had every amp company in the world ask me to endorse them, over the years. To finally have my own signature Marshall is an honor and this amp is truly a master piece!

No need to go into great detail singing the praises of this amp. If you are reading this, you know what it is.

Asking $4,750USD 

If you are interested, Use PM system for communication or send an email:

equipments at protonmail dot com

Thanks for your time...!!!

For sale is a Kaleidescape Strato C Movie Player, Strato C supports lossless multichannel audio and plays high dynamic range movies on televisions and projectors that can process open standard 10-bit HDMI 2.0a HDR. The Strato onscreen user interface is displayed in full 4K Ultra HD at 60 frames per second, resulting in fluid animation and a stunning visual impact.

Strato C plays 4K Ultra HD movies from a Terra movie server, or a Strato movie player. You can start the movie instantly, or you can jump right to your favorite scene or song.

Plays movies from Terra, compact Terra, and Strato S

Compact and quiet for dense rack installations or local placement in a room

New wall mount option lets you mount the Strato C behind a TV for local placement

Ideal for additional viewing zones in residential and marine applications

Custom 1RU rack shelf with faceplates for one or two players sold separately

Kaleidescape designed the Strato C movie player to provide an immersive home cinema experience, with better audio and video playback quality than most commercial theaters. Strato C is a premium 4K Ultra HD movie player that supports high dynamic range (HDR) and lossless multichannel audio including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio. Strato C plays movies from a Terra, a compact Terra, or a Strato S over a network, with bit rates up to 100 Mbps and frame rates up to 60 fps.

If you know about these items I’m sure you already know all the specs so I don’t need to list it.

The asking price is USD$3450

If interested, you can send me a message via PM or send me an email for faster response;
equipments at protonmail dot com

Thanks for looking.!!