NoiseSoft Releases the "QU" and "ROOT DELAY" VST Effects

The Qu is a new VST quad filter effect plug-in for Windows. The Qu consists of four separate "all band" filters with five separate controls for each channel (A to D). The individual tuning of our custom filters produces audio illusions and phenomena that can not be found anywhere else; phase and frequency based stereo panning controls mean that a user can dial in effects that contrast across the whole audio spectrum, especially when used with track envelopes within the host workstation. Controls and features:

• VOLUME: This controls the master volume. Lowest setting is silence and highest setting the maximum output.
• MIX: Controls the mix quantity of all filter sections.
• PITCH (A/B/C/D): Adjusts the affected pitch of each individual filter section from low drones to bell-like high pitched ringing.
• RESONANCE (A/B/C/D): Adjusts the resonance of each filter, from minimal effect to extreme phase shifting and everything between.
• FREQ (A/B/C/D): The frequency control for each filter has custom coded extreme frequency shifting, capable of lo-fi filtering in the low knob settings, all the way to harsh industrial/glitch effects.
• LEFT and RIGHT (A/B/C/D): These are separate controls for left and right phase shifting.

• LEFT and RIGHT: These are separate controls for left and right echo / delay times (milliseconds from 0ms to 10ms).
• FEEDBACK: knob is for controlling the amount of echos you would like. From 1 to (almost) infinity.
• RES knob: Adjusts the resonance of the filter, from minimal effect to drone sound and everything between.
• CUT: Adjusts the filter cutoff. From very metallic to very (sub)bassy.
• RATE: Adjusts the sweep rate of the filter, from about a minute to pseudo granular.
• DEPTH: Adjusts the depth of the filter effect. From light filtering to very dramatic sweeps.
• WET: Controls the volume of the delay and filter effects combined.
• DRY: Controls the volume of the dry signal.