iroc

That kid can shred!

Thats fine, i'll just leave it at 35 for now it sounds fine there. THanks though

Originally posted by JLeurck I've got one of these but mine came w/5881s. The manual says it will take either but you need to reset the bias or you will damage the amp (there are bias trim pots for each stereo side - it says set the bias for 50 milliamps no matter which tube is used). As for the bridged mono thing, the min load it can take is 8 Ohms. Set each side for 4 Ohms for an 8 Ohm mono load, each side to 8 Ohms for a 16 Ohm mono load. No provision for a 4 Ohm mono load. Wow thats alot are you sure, i just got new 6l6's for mine, it was biased at 32milliamps, i set it to 35 with the new quad. It sounds good at 35 but if the manual says to set the 6l6 version to 50 i might try that.