Members jimivaughnking Posted January 27, 2009 Members Share Posted January 27, 2009 I have 2 2-channel 750Watt DMX Strobes. For whatever reason I cannot get them to operate on the same DMX channel. When setting them both to address 193 only one works. Setting one to 193 and one to 225 they both work as 2 seperate fixtures. Then setting them both to 225 only one works again. Not a real big deal except that I am about to run out of Fixtures available on my DMX70. I hate to use 2 of my 12 fixtures on strobe lights that are always going to operate together. Any ideas?Thanks,Nate Link to comment Share on other sites More sharing options...
Members soundlight Posted January 27, 2009 Members Share Posted January 27, 2009 For a workaround, set one of them 2 channels higher than the other. So if #1 is 193, set the other to 195. The second strobe will now be on faders 3 and 4 of that fixture. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.