Members bigfonk Posted April 9, 2013 Members Share Posted April 9, 2013 So I'm re-working two pedal boards at the same time. I've run out of power outputs on my Aspect Design Lab Juice Box (v.1 I believe) However, I have a Boss TU-2 tuner on my board. Can I just run one of the power cables from the power output on the TU-2 to run one more standard Boss pedal? The output of my power supply to the TU-2 is 9V DC, at 450mA Link to comment Share on other sites More sharing options...
Members Shine-ei Posted April 9, 2013 Members Share Posted April 9, 2013 you can you just might run into some noise issues. You could essentially run a one spot or two to power your entire board, which works, but can be noisy and have other problems. Won't hurt to give it a shot. Link to comment Share on other sites More sharing options...
Members ChuckNorris1982 Posted April 9, 2013 Members Share Posted April 9, 2013 The output on the TU-2 is just a daisychained out.... exactly the same as daisychaining it directly from the power supply. However, if you only need to power one additional pedal it can be the neatest option in terms of cabling. I think (from memory) it has a maximum 200ma capability, and that's obviously depending on the power supply feeding it too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.