Members NickDanger830 Posted December 17, 2012 Members Share Posted December 17, 2012 Just looking for some clarification. 4 plugs in the back. Main/Main - 600W? X 2 Plugs Main/Monitor - 600W? here X 2 Plugs If you want to drive just the mains max W, Plug the mains into each Amp respectively. So Left spker = Main/Main Right spker = Main /Monitor Correct? Link to comment Share on other sites More sharing options...
Members dedmeet Posted December 17, 2012 Members Share Posted December 17, 2012 Negative. There is a switch on the front that allows the unit to function in one of two modes. The switch is labeled PWR AMP MODE. By default, the two internal amplifiers put the main mix in stereo (L+R). In the other mode, the main/main labeled jacks put out a mono main signal; the other amp channel puts out the monitor mix signal. The speaker jacks are paralleled for ease in connecting multiple cabinets. Go read this: https://www.peavey.com/products/down...D_-_Manual.pdf Link to comment Share on other sites More sharing options...
Members NickDanger830 Posted December 18, 2012 Author Members Share Posted December 18, 2012 Gottcha... Thank you Link to comment Share on other sites More sharing options...
Members dedmeet Posted December 18, 2012 Members Share Posted December 18, 2012 No problem. Good luck to you! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.