Members hennit_seebo Posted September 5, 2013 Members Share Posted September 5, 2013 So I have recenly aquired a peavey TVX 410 4 ohm cab. When I plug it into my 700 watt Firebass head I get absoululy no sound at all. I know its not the amp because It works just fine in my other cab. Ive taken off the back panel and everything seems to be still soldered ok. Ive wiggled things around in hopes I can get any sort of noise, but I cant get any sound at all to come out of it. Am I doing something wrong or is something disconected. I checked all the wires going to the speakers and everything is connected. Any help would be appricated thanks Link to comment Share on other sites More sharing options...
Members lz4005 Posted September 5, 2013 Members Share Posted September 5, 2013 Check that the jack isn't damaged. If it isn't making contact inside it's like you aren't plugged in at all. Link to comment Share on other sites More sharing options...
Members hennit_seebo Posted September 5, 2013 Author Members Share Posted September 5, 2013 It looks ok, but I've never worked on a jack like this. There is a horn dial on the back along with a board and some others electronics, I'm used to just two wires and a jack. The jack is actually soldered right to the board. Is there any way to check continuity with a volt meter. I will try to take a picture of it so you know what I'm talking about. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.