Members OldCrankyDouche Posted July 20, 2007 Members Share Posted July 20, 2007 Ok. I built one of the First Fuzz Clone pedals. Everything is complete. Connections look good. BUT, I plugged it in. It passes signal just fine. When engaged and I turn the level knob, I can hear it's noise/hiss getting louder, which leads me to believe that this connection is good. But the guitar signal is not heard, effected or not. Can someone please offer some advice? Link to comment Share on other sites More sharing options...
Members thom Posted July 20, 2007 Members Share Posted July 20, 2007 Go over the usual trouble shooting stuff. Start by visiting geofex.com, and check the "debuggin page". Good luck. Link to comment Share on other sites More sharing options...
Members OldCrankyDouche Posted July 20, 2007 Author Members Share Posted July 20, 2007 Eh. I figured it out. Thanks. Link to comment Share on other sites More sharing options...
Members Wolfeman28 Posted July 20, 2007 Members Share Posted July 20, 2007 what was teh problem? Link to comment Share on other sites More sharing options...
Members OldCrankyDouche Posted July 21, 2007 Author Members Share Posted July 21, 2007 The MPSA13 transistor wasnt plugged into the socket correctly, so I tried pulling it out and putting it back in. One of the prongs broke of in the process. A fellow HC/HMer is sending me a new one. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.