Jump to content

Sovtek Mig 100 repair help???


billboardofgod

Recommended Posts

  • Members

Ok, do this step by step....I just did this tonight on my friends Peavey XXX. His amp was humming and no guitar signal was coming through. We thought he blew a brand new KT77. Turns out, one of the tubes wasnt seated right. Works fine now.

 

Start with the weakest link, in this case, the fuses. Make sure they are all good, if you have had any power spikes or if a tube went, odds are a fuse went out. Then pull your tubes, clean the sockets and reseat them. If that doesn't work, change the tubes and hopefully it would work. If not, your options are either that your amp got hot, melted some solder on the resistors and they cooled, leaving a cold solder, or one of your other components went out, meaning hours upon hours with a multimeter, or taking it to and paying a tech. Hope that helps. Just do everything systematically.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...