Members IGWright Posted August 19, 2005 Members Share Posted August 19, 2005 I'm writing up a Device Manager Patch for Cubase SX3. I've got it complete except for 2 parameters: Mute/Solo: F0 43 10 4C 08 03 04 x F7 PattVolume: I got the above Sysex from Yamaha Tech Support by phone today, but it doesn't work. The PattVolume has no entry in the Sysex List Book, neither does Mute/Solo, but the tech said there was a hand written entry with the above information. Below is the Sysex for an adjacent fader to the PattVolume. M.Volume: F0 43 10 4C 00 00 04 x F7 I'm basically stuck at this point. Neither of the parameters are critical, I just figure if I'm gonna do it once, I may as well do it right. Any suggestions would be much appreciated. Ian:confused: Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted August 19, 2005 Share Posted August 19, 2005 I searched for about 15 minutes, but I couldn't find anything for either of those. I was going to suggest you call Yamaha, but I see you've already done that. Sorry! Link to comment Share on other sites More sharing options...
Members IGWright Posted August 20, 2005 Author Members Share Posted August 20, 2005 I appreciate it. I also have been all over the net. I can work without those two parameters + the unit is pretty old, but it does have some good sounds. Ian:cool: Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted August 20, 2005 Share Posted August 20, 2005 The only other option is to start sending different parameter values and see if you can locate the correct ones that way.... but it's a kludge and quite time consuming to try to find it that way. Maybe an email to Yamaha corporate HQ in Japan might get you some info? Link to comment Share on other sites More sharing options...
Members IGWright Posted August 20, 2005 Author Members Share Posted August 20, 2005 Done. I just sent that off to Yamaha Japan. Good suggestion. Thanks. Ian:cool: Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted August 20, 2005 Share Posted August 20, 2005 Cool Ian. Please let us know when you hear back from them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.