ksl
Members-
Posts
420 -
Joined
-
Last visited
Content Type
Profiles
Articles
News
Expert Reviews
Forums
Everything posted by ksl
-
Greetings..... If my memory serves me well, my long gone 57 single pup Jr, & my 59 2 pup TV Yellow Special, had those stop tailpieces that had very little mass to them..... My current Jared James Nichols Epi has a beastly heavy type wraparound tailpiece, which begs the question, do the lower mass stops offer more potential sustain than the intonatable chuncks of stops? If so, I think I'd be willing to forego the ability to intonation & be happier with a more resonant lightweight stop.... Thoughts & results?? Many thnx!!
-
Greetings,,,, As I revisit a pedal that I have twice owned, then for some reason dumped the FT-2, I'm trying to recall if it truly suffered from 'tone suck', as I sorta recalled...? After having very recently dumped 2 $$ boutiquee filters, i just want a simple filter for that on the edge of Jerry Garcia quack,,, not nearly as pronounced, but just that hint of it,,, W/O the tone suck,,,,, Any of the Q-trons, Nano or otherwise? And not a tone killer, as I play very clean & integrity is parmount.... OR give th FT2 one more whirl?? Ibanez AF-9?? Thnx all!! ΰ₯π
-
Greetings again~ In particular I'm looking at an R2024 Challenger amp, and speaker differentials aside, might it sound anything along the lines of their R2523 Champion, some kickass little firecracker....? Many thanks~ΰ₯π
-
yes I'm aware & thanks,,, Mark's great but I want to know quickly... thnx
-
Greetings.... Can anyone tell me if this amp employs any negative feedback? Schematics are non existent.... thnx
-
Thanks again, so just to put a lid on this baby, if I simply wanted to hear just how it sounds w/o the NFB, I could "interrupt" the wire from the spkr jack to the nfb R? And if I liked it, w/o any NFB, I could let it hang as is, perhaps just taping it off, & no othet precautions necessary? thnx
-
Greetings,,,, just want to know if that single footswitch input on the back is TRS, three ring?? No one who's actively selling one on Ebay or Reverb has any clue.... thnx
-
Greetings~ I believe I get it... but let's say I just wanna clip the NFB and not have a pot or switch (which I very well might want), could I simply clip either end of the R & leave it taped off, or remove it without completing the circuit that existed previously (w/o that R)? ΰ₯ thnx
-
And that sound good too!! Greetings.... I've got some real hot 'n nasty amps that roast power tubes; Mesa, Budda, Vox, & Morgan, and I need a great sounding & heat/voltage handling set of tubes.... I recently read about some Preffered Series 7189's that can handle 400+v, and want to know what else is out there that might also be an all-around winner.... Sound, Durability, & won't crap out from the heat. Many thanks~
-
Greetings,,, I'm in need of a 10" Alnico that lives, breathes, smells, sounds & breaks up like a 12" Blue.... 20-25w range,,,, sensitivity no matter..... Great break-up, but defined, like a Blue~ many thnx, ΰ₯π
-
greetings,, in all the writeups, the use of the Toneprint seems to be tied in to having a computer... Are all these TP settings available in their full capacity from a smart phone as well? thnx
-
an olde, long gone Fender PS400,, it had a pair of 6550, & a par of 6L6's & tons of other tubes,,,, it weighed just shy of a ton.... left my house once or twice then dumped it.... No regrets but it was certainly uniqueπ₯΅π₯΅
-
Hey Hoot.... Power Scaling is now very commonplace, especially in the mid to high end range, & if properly done, it's way more than simply a Master..... The London Power Scaling is simply the name of the company that supplies many amp builders with the goods!! Budda is still around, & yes, owned by Peavey,,,, The original Tweed & other early Budda designs are stellar!! Jeff Bober, founder, moved on to found East Amplification..... ΰ₯π
-
Greetings,,,, the neck has been sanded, stained, & I want to finish it for a satiny, protective finish.... I believe I did it once, adding several layer, then after the 1st few applications, I sanded, & repeated.... is this the right stuff? thnx
-
..... with what & how would you rig something in order to trigger that Chorale/Tremolo switch with just the touch of your footwear? And w/o drilling holes......thnx all~
-
thnxπͺπͺ
-
Hey D'MACK,, I'm not a 'regular' user of delay... period.... but when I do, it's typical for triumphant leads & effect,, &, for me & my senses, there's that great spatiality in that 800ms or so range.... Yeah, 1 sec is too much, but 600ms ain't enough.... I settled on a Red Witch Violetta~ Thnx ΰ₯π
-
greetings,,,, While I was able to look up the different programs available, eo a pedal, I can't hear them,,, But can anyone in the know tell me if there's any better than decent UniVibe programs for tweaking? I'm ready to pull the trigger on a TC VibraClone cuz it's truly different,though lo-fi as it is.... But in the $150 tops range, is there anything similar yet better, OR can I expect a decent & tweakable Toneprint on the Corona MINI and/or the full sized Corona? Thnx ΰ₯π πͺπͺ
-
Hiya guys... I think I'm going to settle on a Mr. Black Mini Echo-Delay.... 860ms, small, with a hint of modulation!!
-
Greetings,,, Having previously owned an early Twinmaster head, this is my second one, an all original Tweed 1x12 combo from 1995...... I installed a London Power Scaling control that doesn't suck the life out of the tone, like ALL other masters & attenuators.... I spoke with Jeff about it, & i'll never sell it.. ΰ₯π
-
Nuthin' crazy, at least one second delay, but with that swift tape-like DM2 style decay, & smaalll (narrow)....well made.... delay only..... thnx guys & gals ΰ₯π
-
Greetings.... This has been my 4-way switching of choice of late, giving me B-BM-BN-N.... but I now find a need for B-BM-M-N (I have a p/p Vol pot for BN)... How abouts could I make that happen, using my 4-way template? Many thanks....
-
So with this here meter, with the amp running, & steering clear of the filter caps, or anything else, I should measure across the 1ohm resistors on each power tube? What setting would I put the meter on? I appreciate your assistance~ kenny π
-
Greetingsπ½..... I've circled the pot in question, & clockwise/counter would do what?? Bias adjust? thnx all~πͺπͺ
-
Here lies the culprit.... Being a first-time Mogami user, I wasn't aware of this extra clear shielding that makes yΓ or breaks yΓ !! thnx again~