Jump to content

nomenclature

Members
  • Content Count

    2,834
  • Joined

  • Last visited

Everything posted by nomenclature

  1. I was talking pedals with a friend and something triggered in the back of my mind that I'm trying to track down evidence of, I'm wondering if anyone here remembers similar. Back in the early to mid '00s (I think, could be earlier), when it seemed like ultra voodoo boutique tone sweetener BS was hitting peak, if that's possible, there was a "pedal" that people claimed made everything "better", cleaned your cleans, brightened your tone, did mystical {censored} to your mids etc... and it was passive. It was expensive, the builder was super secretive and the case was all sealed up with threats that opening it would void warranties, you'd be excommunicated from guitar land etc. I can't remember it it was basically just an enclosure with jacks or if there was a stomp switch too, but there were no controls. Eventually someone got their hands on one, opened it up and found that it was just two jacks linked by hand soldered vintage cloth covered wire. Pure snake oil. But even after that, people claimed that it DID make a difference, and it had to do with the wire, or the wrapping, or who knows what else. Does anyone remember this? Am I crazy? Was it an effects forum urban legend or an april fools joke that I'm misremembering? I swear that this was a thing that happened, but I don't even know what I would google for to search for it.
  2. the key input is isolated from the signal path and strictly and on/off trigger. my (likely) overall path is guitar > tuner > dirt > amp > loop > modulation (which is a bit noisy) > gate > delay/verb > back to amp the zuul works really well on its own without the key input, but works amazingly well in the loop with the key for really tight djenty stuff. it’s basically clamped down all the time for complete silence (besides trails on delay and verb), and when the signal hits the key input it opens up and the clamps right back down when the signal reaches the minimum level you set. getting the signal from before the loop is important for the tightness, if i had a tuner out or anything i’d use that but everything but my delay is mono. a y cable would work, but it’s not ideal for minimizing signal loss and would be a bit clunky on what’s becoming a tight board, unless i get something custom made with exact lengths and low profile right angle plugs. also my pickups are currently passive so a buffer would probably be good in the chain anyways.
  3. Heeeeeeeey this place is still here. I haven't been around in years, also stopped playing for years and now I'm getting back into things and rebuilding so I'm looking for suggestions. Basically I'm rebuilding my board from the ground up and this time breaking it into two parts, dirt in front, everything else in the amp loop, BUT since I'm going to be running really high gain stuff in the front, I've picked up a Fortin Zuul. That's going in the loop, but I'm looking for a Y splitter to run in front to split off into the amp and then into the key input of the Zuul to really clamp down. I'm currently using a Micro Pog to do that, but it's a waste of a pedal that I can throw on another board (I can't really use the Pog as an effect because I'm trying to learn 8-string guitar and the Pog makes it TOOO LOW). So what's a decent Y splitter that's not too expensive? I don't need an A/B (I have a Lehle ABY which is great, but I don't need the switching aspect), just a straight up Y box. buffered I guess? The Empress Buffer looks ok (I love their stuff), but I don't need the loop. There's an RJM Music Tech "Tone Saver" which seems to fit the bill and around the same price as the Empress, but I don't know much about them. There's a Suhr buffer which also looks good, but is getting a little on the expensive side considering I just need the second out to be a key (oh yeah, I'm in Canada so stuff is more expensive. I'd like to keep it around $160 CAD tops if possible). there's the Lehle P-Split is getting a little out of my range for what I want to spend (but being passive is a bonus by saving a power supply spot). There's the JHS buffered splitter which is in the right price point but I've read some negative reviews of... Is there anything else out there worth looking at? You'd think a basic Y split box would be easy to find.
×
×
  • Create New...