SharkMinusBear

I'm actually listening to them right now at work, first run-through of the newest album. There's a lot of phaser.... almost too much imo, but I like a lot of the songs so far.

I disagree, bjf makes you a better player.

FS Empress Super Delay- $360 EQD Tone Reaper v1- $130 Mad Professor Tiny Orange Phaser- $280 Lava Retro Coil (Orange)- $50 Avatar 2x12 Premier Custom (v30, g12h30 hellatones)- Orange Tolex, Black Grillcloth- $280

FS: Champion Fuzz Unit- $150 shipped/paypaled to the lower 48 (#15 made by Sonic VI from the latest run) It's a clone of the vintage Barnes & Mullins fuzz unit. Great low end and very thick sounding.

Gah! 3 hours left on the Screw Driver! Everyone jump on it! This is a great pedal, someone get this, it's worth it!

Send me trade offers if you are interested but know that I only want 1-2 pedals. I'm looking for a MicroPOG specifically. First is a Yamaha RGX 820 with Piezo and Seymour Duncans: Purchased in 2003. Duncan JB in the bridge and 59' in the neck. Solid Alder body, Maple neck, Rosewood fingerboard, 22 frets, locking tuners, two outputs (one for piezo/electric blend and one for electric only) The blend knob lets you blend the guitar signal with the piezo signal. The volume and control knobs work, but may need to be replaced after heavy use. Just three paint scratches on the bottom that can't be seen when you play (this one is the biggest: It is set up for 11's and pretty low action. The neck is similar to a Fender in shape. Comes with an SKB hard case $275 shipped/paypaled Next is an Ibanez S470 from 2002 with Seymour Duncans: Purchased in 2002. Duncan Distortion in bridge, Jazz in neck, Dimarzio HS3 (missing pickup cover) in middle. Black Schaller M6 tuners installed on headstock for better tuning stability. Floating bridge- Lo Pro TRS and locking strings. I do not have the right size allen wrench right now to lock or unlock anything. Has a couple small dings on the back of the neck, two dings on the body: Currently there are a couple wiring issues (4th position doesn't work, there is some excess solder I need to clean up) and I would ship it without pickups for 150. Comes with Soft Gig-Bag for $200 Shipped/Paypaled I'll consider any trade or money offers for these as long as you aren't low-balling, send me a PM if you have any interest.

Send me trade offers if you are interested but know that I only want 1-2 pedals. I'm looking for a MicroPOG specifically. First is a Yamaha RGX 820 with Piezo and Seymour Duncans: Purchased in 2003. Duncan JB in the bridge and 59' in the neck. Solid Alder body, Maple neck, Rosewood fingerboard, 22 frets, locking tuners, two outputs (one for piezo/electric blend and one for electric only) The blend knob lets you blend the guitar signal with the piezo signal. The volume and control knobs work, but may need to be replaced after heavy use. Just three paint scratches on the bottom that can't be seen when you play (this one is the biggest: It is set up for 11's and pretty low action. The neck is similar to a Fender in shape. Comes with an SKB hard case $275 shipped/paypaled Next is an Ibanez S470 from 2002 with Seymour Duncans: Purchased in 2002. Duncan Distortion in bridge, Jazz in neck, Dimarzio HS3 (missing pickup cover) in middle. Black Schaller M6 tuners installed on headstock for better tuning stability. Floating bridge- Lo Pro TRS and locking strings. I do not have the right size allen wrench right now to lock or unlock anything. Has a couple small dings on the back of the neck, two dings on the body: Currently there are a couple wiring issues (4th position doesn't work, there is some excess solder I need to clean up) and I would ship it without pickups for 150. Comes with Soft Gig-Bag for $200 Shipped/Paypaled

WTB: Whatever is left of your patch cable kit. I need at least 6 right end plugs and about 3-4 feet of cable. Let me know if you have any you are looking to sell and we can work something out. As far as things I have to trade: Fender 2006 American Standard Tele Hardware + Pups: includes pots and switch which are still wired, you just need to solder the pickups to it and solder the ground connections (may need to extend wire depending on your model tele). Brand New Ernie Ball 6inch right angle patch cable. 2x Planet Waves 6inch directional patch cables (the clunky straight end version) 5foot Fender Instrument Cable 1-Spot Line6 adapter

The first person to buy one of these will get it shipped in an skb electric guitar hardcase. The remaining guitar will be shipped in a soft gigbag. Yamaha RGX 820Z purchased in late 2004 It has a SD 59' in the neck and an SD JB in the bridge. It also has a piezo pickup and knob that can blend the piezo into your normal signal. Two output jacks (one for the guitar/blended signal and another for piezo only). I recently set this up for low action and all the strings have good intonation. It is setup for 11's. It is in good condition with 2 small paint nicks on the bottom front edge and one larger paint nick on the bottom back edge. More Info: http://namm.harmony-central.com/SNAMM02/Content/Yamaha/PR/RGX-Electrics.html I am looking for $300 shipped OBO. Next I have a worn Black Ibanez S470 from 2002-2003 It has a SD Distortion in the Bridge, SD Jazz in the Neck, and a Dimarzio HS-3(missing pickup cover) in the middle. I have black schaller M6 tuners on it and there is a little wear on them where the paint came off from the part where the strings touch. It has the Low TRS Trem 1 floating tremolo but I cannot find the right size allen wrench to unlock to strings or make adjustments. Current 10's on this but it probably needs a good setup to lower the action and check for intonation. Two dings on the body along the side, one small ding on the back from a small screw right by the backplate, and it has a couple small indentations on the back of the neck. Right now I'm not getting sound from the 4th position, but I will fix this before selling. I'm looking for $275 shipped OBO (it does have nice pickups, sounds and plays great) I will consider trades for guitar pedals and possibly an electric bass. I wanted to repost here because I am interested in pedal trades for either. I also have the stock bridge and neck pickups from a 2006 American Telecaster as well as the stock pots & switch which are still wired together. All you would need to do is attach the pots to the control plate and solder the pickups in place. Things I may be interested in: Dirt: Teaser Stallion, Crunch Box Modulation: Reverb, Micro POG Tuner Pedal Nice Right-Angle Patch Cables Callaham Tele Bridge (3 saddle model for American Standard)