Jump to content
  • New Surge Supressor from New Frontier

    By Guest |

    SX115R.jpg
    Like all Surge-X® models, New Frontier Electronics' new SX115R , SX115RT and SX115RL Series Mode surge suppressors provide guaranteed surge protection and power conditioning for any audio, video and computer equipment.

    Housed in a magneticalIy-shielded, single-rack-space enclosure, the SX115R features eight standard grounded AC receptacles and improved EMI/RFI filtering circuitry. Six of these receptacles may be switched on or off by the user via an illuminating red rockerstyle switch, while two remain permanently on. A power LED lights up when the unit is plugged in, while a self-test circuit and additional LED indicator assures the user that the unit is functioning properly.

     

     

    The SX115RT model includes a remote turn-on capability, and the SX115RL model adds two front-panel connectors for Littlite® gooseneck lamps.

    New Frontier Electronics' patented Series Mode technology is superior to conventional MOV circuitry. It provides proven 15-amp protection, stopping surges of up to 6,000 volts, and does not produce ground contamination.

    The SX115R meets the most stringent government purchase specifications for powerline surge suppressors. Its Federal Grade A, Class 1, Mode I (A-1-1) rating assures the user of dependable protection from destructive spikes, surges and inductive transients.

    Specifications and additional features:

    • Load Rating: 15 amps at 120 volts
    • UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, C1 pulse, measured suppressed voltage 290 volts, no failures
    • Limiters (3 circuits): Series surge reactor current limiter. Cascaded, auto-tracking dual polarity voltage limiter. Dual cascaded pulse inverters.
    • Clamping Voltage Onset: 172 volts nominal (2 volts above peak line voltage, auto-tracking)
    • Filter (bi-directional, wave tracking): With 50 ohm load: 3 dB @ 3 kHz; 38 dB @ 100 kHz; 50 dB @ 300 kHz; 50 dB @ 5 MHz; 50 dB @ 30 MHz
    • Let-through Slew Rate: 5000 volt/us disturbance reduced to 28 volt/us within power wave envelope; less than 10 volt/us outside power wave envelope
    • Snubbers: Instant reacting snubbers for fast-rising surges generated within the building
    • Joule Rating Limitation: Unlimited rating, due to current limiting
    • Maximum Surge Pulse Voltage: 6000 volts (1.2 x 50 us pulse), industry standard rating
    • Maximum Surge Current Rating: Unlimited rating, due to current limiting
    • Endurance (C62.41-1991 Category B3 Pulses, Formerly IEEE587 C1): I kv > 500,000; 3 kv > 10,000; 6 kv > 1000 (NRTL-UL certified).
    • Dimensions: 1.75" H x 19" W x 8" D (4.45 x 48.26 x 20.32 cm)
    • Weight: 9 lbs. (4.1 kg)
    • Thermal circuit breaker overload protection
    • 8' grounded 3-wire #14 line cord
    • Made in USA

    New Frontier Electronics is a manufacturer of Series Mode surge protection devices, precision audio analyzers and other related electronic equipment, with corporate headquarters located in New Hope, Pennsylvania.




    User Feedback

    Recommended Comments

    There are no comments to display.


×
×
  • Create New...