M80 8-Channel Class A Mic Pre Now Shipping

The M80 mic preamp can warm up any digital signal path with wonderful analog sound. They are a valuable add-on to any project or professional recording studio and are extremely useful tools for live sound reinforcement or remote on-location recording.

• Each Channel has discrete Class A input amplifiers followed by a twin servo gain stage for ultra low noise and wide gain control.
• Features include: Phase Reverse, Phantom Power, 20 dB Pad, Rumble Filter, +28 dBu headroom, and full output metering per channel.
• Low impedance stereo mix bus for assigning and panning any channel to the main stereo output connectors.
• Special feature: the ldss control on each channel. (The ldss control adjusts the drain current on the input FET amplifier thus altering the even harmonic levels of the signal.) A wide range of control is offered from 0% to 100%. This feature may be used to adjust the harmonics of the signal from absolutely pure (no harmonics) to simulation of the effects of tape saturation and tube "warmth."
• Fully loaded back panel: XLR balanced input/output connectors & TRS line input via Neutrik combo connectors. Separate send and return jacks for inserting dynamics processors (such as the PreSonus ACP88.) Mix output connectors are XLR for balanced signals and TRS connectors for line level signals such as digital audio card inputs.
• Two rack space, steel chassis; high quality, blue, anodized, front panel.
• Internal power transformer with external access for international power requirements. (No wall wart!)