Members bubbastain Posted January 24, 2010 Members Share Posted January 24, 2010 I just picked up a used/unused EMG 85. Went to install it and I couldn't because the part that the height adjustment screw goes into is not threaded. It is not stripped. It is smooth. The EMG 81 I took out is threaded. Any ideas? Link to comment Share on other sites More sharing options...
Members eellox Posted January 24, 2010 Members Share Posted January 24, 2010 figure out what thread size the screw is and then go to the hardware store and by a Thread Tap. Taps are what you run through the hole to put the threads in it. Link to comment Share on other sites More sharing options...
Members Mustaine-who? Posted January 24, 2010 Members Share Posted January 24, 2010 Take your screw down to Lowes and find a nut that fits it...super glue said nut to the back side of the PuP feet. People do it all the time when the PuP is a direct mount PuP and they want to use it for a guitar with PuP rings... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.