Members rll Posted January 31, 2010 Members Share Posted January 31, 2010 Are the holes in the headstock the same size as the standard fenders? Anyone know? This is for a early 80's Peavey Patriot. Link to comment Share on other sites More sharing options...
Members Surfdude Posted January 31, 2010 Members Share Posted January 31, 2010 I just put Carvin tuners into an old Peavey T-15 neck about two weeks ago and the holes needed to be drilled out just a little bit. Carvin tuners need a 13/32 hole so the Peavey holes were a little smaller. Not sure the size of hole the Fender tuners need but if they are 13/32 or larger, you will need to drill a bit. Also, if I ever sell my T-15 neck, I will let you know. It's a little short and the radius is a little flat for my taste but I think I would have to move the bridge if I put a Gibson scale neck on that guitar. Surfy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.