Jump to content

Epiphone Kat Census...Who's Got Em?


Elias Graves

Recommended Posts

  • Members

I had a tobacco burst one.

Fantastic build quality. Horrible pickups and electronics.

If you take muddy cheap pickups and add a muddy wiring scheme (master volume means it goes through TWO pots to get to the amp.) And they were linear taper (more fail)

I replaced the pickups and wiring. Got rid of the master volume and made it more like a Les Paul wiring. It sounded great then but I ended up selling to a band mate for what I put into it. I had an Agile Harm 1 that I would recommend more because it needed less modding from stock and a similar price.

Link to comment
Share on other sites

  • Members

Could somebody please measure the length of the body and the widths of the upper and lower bout and the middle width?


Gracias!

 

 

I measured mine with these APPROXIMATE measurements:

 

Lower bout = 14"

 

Middle = 10 1/4"

 

Upper bout = 8 1/4"

 

I say approx. because I used a cloth measuring tape, which is not very accurate. Maybe Elias can verify or refute these measurements.

 

Oh, and de nada!

Link to comment
Share on other sites

  • Members

I measured mine with these APPROXIMATE measurements:


Lower bout = 14"


Middle = 10 1/4"


Upper bout = 8 1/4"


I say approx. because I used a cloth measuring tape, which is not very accurate. Maybe Elias can verify or refute these measurements.


Oh, and
de nada
!

 

 

Sounds like a big one.

So we are literally turning this into a measuring contest now?

:poke:

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...