Members wkrantz7 Posted March 17, 2010 Members Share Posted March 17, 2010 I'm about to wire together an HSS guitar. I'm just making sure- the hot to switch wire coming from the humbucker goes to the same spot on the switch no matter what right? I have a diagram for an SSS config but I figure there's no difference with the humbucker as long as the hot wire goes to the same spot. Thanks Link to comment Share on other sites More sharing options...
Members _pete_ Posted March 17, 2010 Members Share Posted March 17, 2010 Yep. You're good. Link to comment Share on other sites More sharing options...
Members guitarcapo Posted March 17, 2010 Members Share Posted March 17, 2010 I use 3 mini toggles and two push pull pots. Each toggle activates a pickup.Pull volume and the humbucker splits. Pull tone and the neck pickup is reverse phased. That's how I roll. Link to comment Share on other sites More sharing options...
Members Belva Posted March 17, 2010 Members Share Posted March 17, 2010 http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w Use the colors for your pups & break out the solder. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.