Members bikescene Posted May 1, 2010 Members Share Posted May 1, 2010 Hi. I pulled out the middle pickup and its corresponding tone control on one of my strats for the time being. I am thinking a 3/8" screw should be able cover up the pot hole but I can't think of anything for the middle pickup position. Can anyone recommend a solution? Link to comment Share on other sites More sharing options...
Members vintage clubber Posted May 1, 2010 Members Share Posted May 1, 2010 custom pickguard? Link to comment Share on other sites More sharing options...
Members Grantus Posted May 1, 2010 Members Share Posted May 1, 2010 Duct tape? Link to comment Share on other sites More sharing options...
Members lefchr Posted May 1, 2010 Members Share Posted May 1, 2010 A pickup:confused: just dont connect it Link to comment Share on other sites More sharing options...
Members Alex_SF Posted May 1, 2010 Members Share Posted May 1, 2010 A pickup:confused: just dont connect it .... and screw it all the way down so it's flush with the pickguard, if you took it out because it was in the way of your picking hand. Link to comment Share on other sites More sharing options...
Members olgluefoot Posted May 1, 2010 Members Share Posted May 1, 2010 Dont be a penny pincher. Get a pickguard made. Link to comment Share on other sites More sharing options...
Members Jkater Posted May 1, 2010 Members Share Posted May 1, 2010 I thought also of a "dummy" pick-up. and the idea of screwing it down is good too. Link to comment Share on other sites More sharing options...
Members IamBurnout Posted May 1, 2010 Members Share Posted May 1, 2010 You can get a nylon plug for the hole where the pot was. They sell 'em at hardware stores for like $0.40 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.