Members stingxnj Posted December 13, 2010 Members Share Posted December 13, 2010 Seeing as how both the Tone Zone and the Evo have four leads, I was thinking it would be useful to be able to split them for different tonal variety. So, I am curious as to how to best approach this...should I simply replace the volume pot with a similar but push/pull variety or take a dremel to the body and rig a mini switch to accomplish the task? What say ye? Looking to do this as cleanly as possible. I think this would make a useful mod as I use it often on my Schecter PT depending on song I'm playing. Link to comment Share on other sites More sharing options...
Members webwarmiller Posted December 13, 2010 Members Share Posted December 13, 2010 I would add a pair of ON-ON-ON DPDT mini-switches. This allows either pickup to be as follows: HB Series, Split, HB Parallel. Link to comment Share on other sites More sharing options...
Members stingxnj Posted December 13, 2010 Author Members Share Posted December 13, 2010 I like that layout a lot. Thanks for the suggestion! Link to comment Share on other sites More sharing options...
Members Nephilim-777 Posted December 14, 2010 Members Share Posted December 14, 2010 I use ON-ON DPDT mini-switches for splits like the following. These are actually coil splits, not taps. Since you are in there, adding the former diagram with ON-ON-ON might be useful. I just I don't use them and normally only split bridges myself. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.