Jump to content

Anyone Have One Of These?


Bbreaker

Recommended Posts

  • Members

I actually just saw that for the first time yesterday. Pretty cool for what it is, but if I were to get an Agile, I'd get the Root Beer 3100 with the 1.75" nut and the MOP vs Abalone inlays. I don't care about what it says on the headstock, but I don't want to get a 10lb LP. Somewhere right around 8.5lbs and I start to lose interest.

Link to comment
Share on other sites

  • Members

 

Not fond of goldtops at all. I'd go with
anything but would like that with black or dk brown pick-guard & pup rings.

 

 

Yeah, if I get ever get a Rootbeer LP from then, I'll ditch the pickguard entirely and probably put on black rings and probably install a set of zebra Dimarzios I have on hand.

Link to comment
Share on other sites

  • Members

 

Is that the standard Gibson LP nut width?

 

 

Nope, it's about 1mm wider than standard Gibson width.

 

I'm not as much concerned with the wider nut as having MOP rather than abalone inlays. The abalone is a bit over the top for my tastes.

Link to comment
Share on other sites

  • Members

 

I actually just saw that for the first time yesterday. Pretty cool for what it is, but if I were to get an Agile, I'd get the Root Beer 3100 with the 1.75" nut and the MOP vs Abalone inlays. I don't care about what it says on the headstock, but I don't want to get a 10lb LP. Somewhere right around 8.5lbs and I start to lose interest.

 

 

i'm in the root beer camp too. thought they sold out of those a couple times now iirc.

Link to comment
Share on other sites

  • Members

I usually don't go for single pickup guitars either, but I think my next next next project is going to be to build up something as close to this as possible, including the color.

 

Not sure if I'd prefer an HB or the P90 though I'm leaning towards an HB.

 

PelhamSGJr1.jpg

Link to comment
Share on other sites

  • Members

I had the 3 P90 2500 with the same config as this. Great guitar, but it was 11 lbs. It actually broke a strap once and bounced and slapped down on the headstock. It lost some of it's goldtop that night. It was stolen a year ago. agile25003.jpg

To me those look pointless and ugly. I'm always happy to find that rare guitar that doesn't spark my GAS jets.



Fixed here


al3010gold2p90s5.jpg

Link to comment
Share on other sites

  • Members

Search is on the top right of the first page.

 

Not fond of goldtops at all. I'd go with
Rootbeer
anything but would like that with black or dk brown pick-guard & pup rings.


Is it me or does Rondo have the absolute worst website for navigation? Where's a stinking search feature?
:facepalm:

Link to comment
Share on other sites

  • Members

I really do think they made a mistake making this an archtop. It should have been a flattop without the angled neck (and the required T-O-M bridge and stop tailpiece).


It's really just an obese Junior.

 

Yeah, I think that's what I didn't like about it either. If it were a flat top and thinner, I'd probably like it. For some reason though, I do like the looks of it better on that black Custom.

 

 

 

 

 

 

 

 

 

DSC01946.jpg

DSC01951.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...