Members guitarcat46 Posted April 5, 2011 Members Share Posted April 5, 2011 I'm going to be building a Partscaster for the first time, and was wonderingwhich bridges will match up with a Mighty Mite body & neck? I'm thinking of using a Super-Vee bridge, and was wondering if thatwould be a good choice? Thanks! Link to comment Share on other sites More sharing options...
Members wartoxin Posted April 5, 2011 Members Share Posted April 5, 2011 There are several sizes of strat bridge but I assumed all would line up? Link to comment Share on other sites More sharing options...
Members DaleH Posted April 5, 2011 Members Share Posted April 5, 2011 Is the body drilled for the trem. Link to comment Share on other sites More sharing options...
Members guitarcat46 Posted April 5, 2011 Author Members Share Posted April 5, 2011 The Mighty Mite bodies are routed for the tremolo, but you have to drill the holes to mount the bridge.I was on the Mighty Mite website, and they really don't give you specs for anything. Link to comment Share on other sites More sharing options...
Members Steadfastly Posted April 5, 2011 Members Share Posted April 5, 2011 Why don't you check with Mighty Mite? Link to comment Share on other sites More sharing options...
Members DaleH Posted April 5, 2011 Members Share Posted April 5, 2011 You can put any trem on then. Do you what a vintage type or 2 point ?What is the nut width of the neck? If it's 1 5/8" you may what to go with a 2 1/16" string spacing trem. I put one of these 2 7/32" trems on a build. A good unit but it has vintage string spacing and leaves very little room for error on the edge on the high E along the fretboard. http://www.guitarfetish.com/USA-Spaced-Solid-Brass-Block-Tremolo-Complete-Kit_p_1239.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.