Members justinbass Posted January 26, 2007 Members Posted January 26, 2007 I recently picked up a Seymour Duncan 1/4lb P pickup to drop into my SX P. The short black wire connecting the two pickups isn't connected at one end. It came loose from the solder joint while I was screwing down the pickup into the body. I put next to no strain on the wire, so it was clearly a weak solder joint to begin with. Will I just need to solder it back onto the pickup, or am I screwed?
Members fretless Posted January 26, 2007 Members Posted January 26, 2007 you could try to solder it back , But I think SD will replace it .
Members justinbass Posted January 26, 2007 Author Members Posted January 26, 2007 I'll send them an email. That would be great.
Members Rowka Posted January 26, 2007 Members Posted January 26, 2007 Just solder it. Don't be afraid of a little heat and lead fumes.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.