Jump to content
HAPPY NEW YEAR, TO ALL OUR HARMONY CENTRAL FORUMITES AND GUESTS!! ×

Hey Kindness!


tylytle

Recommended Posts

  • Moderators
Posted

I'm not set up to refinish and pulling frets on a maple board will certainly screw with the finish on the face of the board. If you just need a level and crown, send me a PM and send the bass to me. Otherwise, your best bet is a full service shop. I can help you find reasonable ones if you need help.

  • Members
Posted

Yeah, It's my guitard's American Tele. I wondered about the finish. There is a shop in Norman OK, About 2 hours south of me that is supposed to have a nice machine thingy for doing this. I will check them out.

 

It is beyond a crown job. He has a B and G bender on it and it has cut nice deep grooves in the frets.

 

Skatalite, You know if Norman Music is good at this?

  • Moderators
Posted

Depends on how high the frets are. If there is enough material beneath the groove to create a crown, it can be done. It will also require lowering the grooves in the nut.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...