Members rucreek Posted October 15, 2007 Members Share Posted October 15, 2007 After all adjustments to truss rod and neck, I realized that strings didn't go straight over the pickup dots (not exactly between two suitable dots). So I moved string holder sligtly to the right direction. Does anibody do it like I did? Because now bridge string holders looks like this ||/. Sorry for stupid question Link to comment Share on other sites More sharing options...
Members mrcrow Posted October 15, 2007 Members Share Posted October 15, 2007 After all adjustments to truss rod and neck, I realized that strings didn't go straight over the pickup dots (not exactly between two suitable dots). So I moved string holder sligtly to the right direction. Does anibody do it like I did? Because now bridge string holders looks like this ||/. Sorry for stupid question the position the saddles in relative to each other are relatively unimportant..the string spacing is i put hard rubber packers between the saddles to get the spacing... cut them from an eraser... the trouble with the standard fender bridge is that the saddles can skid around.. if you replace the bridge a roller design will let you set the strings..but has to be done each string change of course the badass II can should be grooved to take care of this... Link to comment Share on other sites More sharing options...
Members rucreek Posted October 15, 2007 Author Members Share Posted October 15, 2007 Thanks a lot for information. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.