Jump to content

G-Major 1.27 is out.


Recommended Posts

  • 2 weeks later...
  • Members

 

Originally posted by LeftOfHeaven

What do the updates add? Or do they just smooth out some previous bugs. I know alot of people complain that there isn't a gain setting on the compressor. Was this changed? Any info would be cool.


Thanks,


 

 

There were some big changes:

 

In Level, Global Out Level and Preset Out Level

We have added a Mapping Response Curve to the three level parameters the Mod Menu. This will make you able to define your own curve to the "In Level", "Global Out Level" and "Preset Out Level" parameters. This gives highly added value when using an Expression pedal to control one or more of these parameters.

 

External control of EQ and Noise Gate On/Off added

The Noise Gate and EQ blocks can now also be switched On/Off either via a MIDI CC message sent from your MIDI board or via a momentary pedal connected to the External Control In.

 

Level at "Bypass All" has been changed to be equal with Preset Output Level

This way the Output level is kept according to the set Preset Output Level also when the G-Major is bypassed.

 

Gain Parameter added to the Compressor

In many cases the Compressor will reduce the signal level. G-Major has a built in Auto Makeup Gain to compensate for this. On request we have now added a regular Gain parameter also.

 

Kill Dry Parameter

To get full benifit of all effect blocks the G-Major should be used in a serial loop. However, some amps or setups uses parallel loops. To achieve the best performance in these setups the new added Kill-Dry parameter muting the Dry signal on the Outputs, should be used.

 

The Pitch detection for the Tuner is now positioned before the Input Level control

This means that the Tuner works perfectly even if your expression pedal controlling the Input Level is turned down.

Independend level control of the two voices in the pitch section

The Pitch Shifter in the Pitch block features two voices. It is now possible to set individual Levels on the two voices.

 

Bugfixes:

- Fixed issue with DRAM timing.

- Small bugs fixed in the Reverb filters.

- The digital Input now works when you set G-Major to "Digital In" and "Internal Clock".

- Bug in Switch Input solved.

- Momentary switch now also works with Preset Boost.

- Global Input Level control has been moved to after the Noise Gate.

 

There was a bug in 1.26 that screwed up CC controls (ON=OFF) (OFF=ON)

 

1.27 just was to fix that.

Link to comment
Share on other sites

  • Members

 

Originally posted by EVH Wolfgang



There were some big changes:


In Level, Global Out Level and Preset Out Level

We have added a Mapping Response Curve to the three level parameters the Mod Menu. This will make you able to define your own curve to the "In Level", "Global Out Level" and "Preset Out Level" parameters. This gives highly added value when using an Expression pedal to control one or more of these parameters.


External control of EQ and Noise Gate On/Off added

The Noise Gate and EQ blocks can now also be switched On/Off either via a MIDI CC message sent from your MIDI board or via a momentary pedal connected to the External Control In.


Level at "Bypass All" has been changed to be equal with Preset Output Level

This way the Output level is kept according to the set Preset Output Level also when the G-Major is bypassed.


Gain Parameter added to the Compressor

In many cases the Compressor will reduce the signal level. G-Major has a built in Auto Makeup Gain to compensate for this. On request we have now added a regular Gain parameter also.


Kill Dry Parameter

To get full benifit of all effect blocks the G-Major should be used in a serial loop. However, some amps or setups uses parallel loops. To achieve the best performance in these setups the new added Kill-Dry parameter muting the Dry signal on the Outputs, should be used.


The Pitch detection for the Tuner is now positioned before the Input Level control

This means that the Tuner works perfectly even if your expression pedal controlling the Input Level is turned down.

Independend level control of the two voices in the pitch section

The Pitch Shifter in the Pitch block features two voices. It is now possible to set individual Levels on the two voices.


Bugfixes:

- Fixed issue with DRAM timing.

- Small bugs fixed in the Reverb filters.

- The digital Input now works when you set G-Major to "Digital In" and "Internal Clock".

- Bug in Switch Input solved.

- Momentary switch now also works with Preset Boost.

- Global Input Level control has been moved to after the Noise Gate.


There was a bug in 1.26 that screwed up CC controls (ON=OFF) (OFF=ON)


1.27 just was to fix that.

 

 

Are there any known bugs still to be fixed ?

 

I have to say, although I'm happy with mine, the moment I see that I still did not do the software update, so my unit is supposed to have a DRAM timing issue ans sime bugs in the reverb filters, it doesn't pass me a lot of confidence (even supposing that this should be the same for most of the digital unit from other manufactures).

 

Thanks,

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...