Jump to content

Question for VHT 2902 owners


DJL

Recommended Posts

  • Members

Would bad tubes cause one side to make a very nasty loud noise? I am using one side(A) I have it going into a 2x12 with 2 jacks both speakers having 8 ohms. I have it in 16 ohm mode-is this correct or is 8 ohm ok. If I take the bad tubes out and leave the standby off on channel B is this ok. Thanx

Link to comment
Share on other sites

  • Members

If you use one side (A) for both speakers then you shoud put the Ohm selector

to 4 Ohms because the second output in every side is connected in parallel

with the First output (use first).

If both speakers is 8 Ohms then total impedance is 4 Ohms in parallel.:)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...