Jump to content

Problem with Hughes & Kettner Access Stageboard


Recommended Posts

  • Members

Bear in mind I'm not familiar with the kit in question at all.

 

1) If you didn't get the manual with it, check the H&K website and see if there's a copy available for download. You never know, it might be designed to disable the preamp when plugged in, assuming you'll control everything from the board. Daft idea but possible.

 

2) If Hughes & Kettner don't come back to you with anything useful, I suggest you seek out a skilled electronics guy who can service it for you and get it working. Depending what he has to do this could actually cost you more than you shelled out for the Access preamp!

 

I know of a couple of good electronics guys here in the South West if that's any use to you. I assume you're in the UK as you paid pounds for it. :)

Link to comment
Share on other sites

  • Members

Cheers for the response.

 

I actually got an email back from Hughes & Kettner this morning and gave it too the guys at the store it was being repaired at.

 

They're going to send it off to be repaired for me and cover the costs.

 

Thanks again though

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...