Members ksl Posted September 4, 2021 Members Share Posted September 4, 2021 (edited) Hi all~ As I prepare to replace the piece of "you know what' input jack on my Pro Jr., now a Tonedog Pro Sr., I see shunting & nob,,, why and when would I desire or need the shunting type jack for my purpose?? Thnks Edited September 4, 2021 by ksl Quote Link to comment Share on other sites More sharing options...
Members Mr.Grumpy Posted September 6, 2021 Members Share Posted September 6, 2021 The shunt grounds the input when nothing is plugged in; it's to prevent open-circuit hum when nothing's plugged into the amp. Quote Link to comment Share on other sites More sharing options...
Members onelife Posted September 6, 2021 Members Share Posted September 6, 2021 On 9/4/2021 at 12:46 PM, ksl said: Hi all~ As I prepare to replace the piece of "you know what' input jack on my Pro Jr ... Does the jack need to be replaced or just reseated and resoldered on the printed circuit board? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.