Jump to content

Sub power


Recommended Posts

  • Members

I have a PV1500 that currently powers a single Peavey UL115 sub on one channel with 2 x 8ohm tops in parallel on the other (using the built in crossover)

 

I don't think the UL series is available in the US, the specs for the UL115 are:

500 Watts RMS continuous, 1000 Watts program.

4 Ohms.

15'' (381mm) BlackWidow

Link to comment
Share on other sites

  • Members

I figured as much, just wanted to hear it from the horses mouth, so to speak :thu:

 

When you talk about setting HPF's what piece of kit normally covers this duty? I see most EQ's have HPF's but they appear to have preset parameters. I currently use the 40Hz 12dB/oct HPF on the amp - is that sufficient for my current setup? Is there anything else I should be using to protect my speakers, such as adding limiting?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...