Jump to content

Problem ONLY When Using 9v Battery


Recommended Posts

  • Members

Good eve' all~ I'm having in issue with this older (but not Uber vintage) Ibanez Tube Screamer, that when I got it used, the pedal did not light up or work with a fresh battery & cables inserted. I checked for positive continuity between the battery holder lugs & their associated connects. But it works just fine when using it in my pedal board, powered by juice from the wall. Once, I was able to get a momentary flicker of light out of it by fiddling w/the wires & battery instered, but I couldn't do it on command & try to trace the culprit. The pedal did come with an intermittent on/off button, but that was easily replaced with the exact same button. Any thoughts, or other not so obvious checkpoints? Many thanks in advance~~ Stay safe & be well!!

20210314_192318.jpg

20210314_192250.jpg

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...