Members ksl Posted January 12, 2020 Members Share Posted January 12, 2020 Hi all~ I'm strongly considering having a master put in my Budda TwinMaster, but I wanted some feedback (literally!) from those of you who have had some success with this. I assume PPIMV means I'd be affecting the signal after the power tube section, and/or is there another MV that might better suit this unique amp? FWIW, I use mostly the high gain input. Thanks, Kenny 🕉 Link to comment Share on other sites More sharing options...
Members Mikeo Posted January 13, 2020 Members Share Posted January 13, 2020 I thought you were going to get an attenuater? Link to comment Share on other sites More sharing options...
Members ksl Posted January 13, 2020 Author Members Share Posted January 13, 2020 I know,, but since the Budda is my only amp w/o a MV, and I don't want to suffer the tone suck, & I'm not about to spend 3-400 for a decent soak to use on only 1 amp.... Link to comment Share on other sites More sharing options...
Members ksl Posted January 13, 2020 Author Members Share Posted January 13, 2020 So, is my only hope for any attenuation post power tubes an attenuater?Also, I understand the different MV's, pre & post PI, work better in certain designs, like post in Marshalls & pre in Fenders. But how could I better determine what would work best in the relatively simple Budda design? I want to do this only once.Thanks!! Link to comment Share on other sites More sharing options...
Members Mikeo Posted January 13, 2020 Members Share Posted January 13, 2020 https://guitar.com/guides/diy-workshop/diy-workshop-build-your-own-attenuator/ http://diy-fever.com/misc/air-brake-attenuator/ https://www.electricalaudio.com/phpBB/viewtopic.php?f=5&t=68478&p=2012274 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.