Jump to content
Sign in to follow this  
Baddog1123

E-Mu B3 and Proteus 2000 not responding to expression pedal

Recommended Posts

I have two E-Mu modules in my rack, a B3 and a Proteus 2000. When I connect a volume/expression pedal to my MIDI controller, the E-Mu modules do not respond to pedal changes by changing the volume. I also have a Roland XV-5050 in my rack which DOES respond to expression pedal changes using the same MIDI controller and pedal, so I know the pedal and controller are working properly.

 

I have tried using both a Roland Juno-DS88 and a Studiologic Numa Compact 2X as the MIDI controller, but the E-Mu's will not change volume when I use the pedal. However, I believe that the E-Mu's are "seeing" the MIDI expression pedal messages sent by the controller because the front-panel MIDI activity LED is lit constantly when I rock the volume pedal with no keys depressed.

 

I am new to the E-Mu modules, having just purchased them within the past few months. Does anyone have insight into how I can make the E-Mu's recognize and respond to expression pedal changes? Since the architecture and settings on the B3 and Proteus 2000 are similar, I am guessing that it is the same configuration issue on both units. Is there a "PatchCord" setting that I can create on a per-patch basis to force it to respond to expression pedal changes by altering the amp or MIDI volume?

 

I've tried everything that I can think of. Hoping you guys and gals can help me out.

 

Thanks!

Share this post


Link to post
Share on other sites

I'm not certain I can help, other than confirming that yes, the E-Mu Proteus modules definitely respond to expression via MIDI.  And the response is global, not just per patch (so I don't think your answer is in the PatchCord parameters)  I have an E-Mu B-3 module which I used to use for that all the time.  (I slaved it through a DX21).  I have since gotten a Proteus V6 keyboard and moved the B3 board into it, so I don't use expression through MIDI anymore but rather just plug the expression pedal directly.

Also, yes, all the Proteus 2000 modules share the same architecture is the same.  There have been a few updates, so they need to be the same version, but otherwise, they're identical.

So...the pedal works with another setup so we know the pedal is not at fault...The only thing I can think of then id maybe your modules isn't set to the correct channels.  You probably checked that already..but if memory serves, when coming from out of the box, the Proteus modules are set to the multitimbral mode.  I'm going way back here, but I recall getting messed up on this.  I use my E-Mu modules straight forward (I also have an X-Lead module), and I just want to plug in the MIDI and play one patch at a time, not multiple.  But it was something like set up to play any of the 16 channels, and what I was seeing in the display wasn't necessarily what I was playing.  This probably isn't what your problem is, but I recall having to mess with it.

I took a quick look in the Master (global) menu...There are several Realtime Controller parameters.  I haven't adjusted them before so I can't say what they do...Maybe look at them?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...