Members kr236rk Posted October 24, 2018 Members Share Posted October 24, 2018 Hi, Have an ambient pedal-board set-up, is there any way I can route or channel the whole board through one stomp button, so that I can switch between the ambient effects & other non-ambient pedals / boards please? At the moment I'd have to manually by-pass about half a dozen pedals, I need a switch which will control the whole lot. Thanks. Link to comment Share on other sites More sharing options...
Members DeepEnd Posted October 24, 2018 Members Share Posted October 24, 2018 You can probably do what you want with an A/B pedal. Link to comment Share on other sites More sharing options...
Members kr236rk Posted October 25, 2018 Author Members Share Posted October 25, 2018 You can probably do what you want with an A/B pedal. Cool Also seen one of these? BOSS LS-2 Line Selector Pedal. [h=1][/h] Link to comment Share on other sites More sharing options...
Members t_e_l_e Posted October 25, 2018 Members Share Posted October 25, 2018 you may need to have a look at effect loop switches/controllersthe simplest one have one loop and a bypass, in the loops send and return you can plug in the efx pedal chain you want to switch on and off at once. the switch bypass either the loop, or sends your signal through your efx pedals. there are out ones with 1, 2, 4, or even 8 individuall loops, the more loops/switches the more expensive they are, some are programmable and can store presets, so you can switch with one switch more loops on/off at once, some alow you to change the order of the loops signal chain etc.the sky is the limit i have no particuar recommendation, because in the past years there have been a lot of new things on the market and don't have any experience with any of them, so i don'T know what to recommend Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.