Jump to content

MINT! Diezel Herbert 180W Guitar Amplifier - $3,775 (San Diego)


Cyborg

Recommended Posts

  • Members

The Diezel Herbert is a mighty 180W head with three completely independent channels, including separate EQs, for perfectly dialed sounds at any output level.

 

Accepted tube types include (but not limited to):

 

EL34/6CA7: Aggressive, slender low end, higher total harmonic distortion . . . Recommended bias setting: 30-35mA

5881/6L6: Great tube for clean sounds, good bluesy tones, also has strong bass and excellent clarity . . . Recommended bias setting: 25-35mA

6550: Very loud, very good dynamics, strong low end, amazingly percussive . . . Recommended bias: 40-60mA

KT88/KT100: Similar to 6550, but very punchy with great clarity and warmth, expensive . . . Recommended bias: 35-50m

 

The Herbert started out as a clean sheet of paper. Peter Diezel began with a different set of parameters. This time, the goal was to produce an extraordinary performance amp, capable of delivering delicate, dynamic shimmer; detailed, focused crunch and aggressive, soaring solo tones effortlessly - right out of the box - with the knobs at 12 o'clock.

 

Store switches, loop and mute patches simply by hitting the store switch. If you want to expand your rig, Herbert has two different series loops. Use the switchable loop to add channels with an outboard preamp. Use the non-switchable with your preferred FX unit. If you need to tune while gigging, simply set a patch muted with midi.

 

With colossal headroom, sophisticated cleans and vicious dirty sounds, the Herbert is unlike any other amp you've heard. Hear one with your own ears as soon as possible.

 

Contact: David (619) 741-2292

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...