Members mbengs1 Posted December 9, 2015 Members Share Posted December 9, 2015 i'm thinking of upgrading my lo-trs 2 trem of my ibanez S to a lo pro Edge trem. is the trem post spacing the same for all ibanez tremolo systems? Link to comment Share on other sites More sharing options...
Members badpenguin Posted December 9, 2015 Members Share Posted December 9, 2015 No.you asked that question earlier, and were directed to the JEMsite that had all the answers. Didn't you pay attention to your own posts? Link to comment Share on other sites More sharing options...
Members mbengs1 Posted December 9, 2015 Author Members Share Posted December 9, 2015 oh i don't remember posting that before Link to comment Share on other sites More sharing options...
Members badpenguin Posted December 9, 2015 Members Share Posted December 9, 2015 http://www.harmonycentral.com/forum/forum/guitar/acapella-41/31657177-ibanez-whammy-system-question Link to comment Share on other sites More sharing options...
Moderators Ratae Corieltauvorum Posted December 10, 2015 Moderators Share Posted December 10, 2015 oh i don't remember posting that before Link to comment Share on other sites More sharing options...
Members mbengs1 Posted December 10, 2015 Author Members Share Posted December 10, 2015 that was a different topic. in there i was asking if you can replace a lo-trs trem with an edge trem without any modification. here i'm just asking if the distance between the trem posts are the same. Link to comment Share on other sites More sharing options...
Members badpenguin Posted December 10, 2015 Members Share Posted December 10, 2015 Read thru the posts, and find your own answer. Or, better yet, MEASURE. Link to comment Share on other sites More sharing options...
Members WRGKMC Posted December 10, 2015 Members Share Posted December 10, 2015 You should go to the Ibanez forum for this information. I did a Google search and found the information immediately. The Pro wont have the same spacing as the low pro. Edge, Lo-Pro Edge, TRS, Lo-TRS and Lo-TRS II are 74mm.Edge Pro and Edge III are 73mm. Not sure about the Pro II An actual Floyd is 74mm and will fit in place of the Low Pro Edge. Here's an example of one guy replacing the trem with a Floyd. He didn't have to do any additional stud repositioning or routing so that's likely your best option. http://www.hammer-software.com/glissandos/RG470Resurrection.html Gotoh makes a 74mm but its not just the stud spacing you should be concerned about.The route for the bridge is different between several of these bridges. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.