Jump to content

JBL SR-X system tips


Recommended Posts

  • Members

I'm working at a club this weekend running sound for a couple shows...I met with another friend who asked me to help install a DBX Driverack PA+ in place of a dead Behringer crossover...the system consists of JBL SR4733X tops, powered by a QSC PLX2402 in stereo, over top of 4 Yamaha SW118V's powered by a QSC PLX3402 in stereo.  The owner is looking for a set of JBL SR4719X's to replace the Yamaha's, but it will have to do for this weekend.  Any tips on the SR4733X tops as far as EQ or anything to watch out for?

Link to comment
Share on other sites

  • Members

Here is a link to what is in the PA+ for speaker profiles, the guys here that run JBL should be able to tell you which model those are closest to so you have a starting point. You also may want to email Josh at dbx; he has been very quick to respond to anything I have asked him. I won't post his personal address but you can get him through the one below.

 

support@dbxpro.com

 

http://www.dbxpro.com/system/documents/719/original/DriveRack%20PA%20%20Preset%20List.pdf?1324408554

 

The forum over there is really good as well, there is a ton of info on the PA+ in the configuration forum.

 

http://www.dbxpro.com/forum/viewforum.php?f=18&sid=11645f363edb8ee3f9d94856797996b8

 

 

Link to comment
Share on other sites

  • Members

I peronally wouldn't bother with the profiles already in the Driverack.  I set up an SRX rig, 722's on an RMX 4050 over 728's on an RMX 5050.  Using the settings for that stuff in the driverack didn't sound great at all.  I just set it up as a basic crossover and did minor tweaks over the next month or so after gigs until I got what I wanted out of it. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...