Members MesaMonster Posted April 25, 2014 Members Share Posted April 25, 2014 I purchased and iTrack Solo because it could be used on the iPad and my PC. I was working when I first bought it. Now, my iPad does not see it and my PC sees it but nothing is coming through. Does this sound like the interface is bad or I am I not setting it up right? Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted April 25, 2014 Share Posted April 25, 2014 If it was working originally, and the iPad isn't seeing it now, that sounds a bit suspicious to me... they seem to just work with just about anything that's designed to be compatible with them. I'd reboot (shut off completely, then re-start) the iPad, and then I'd check the cable to make sure it's good (try it with another device) and if it is, the problem is probably the interface. Have you changed anything about your setup since the last time it was working? Link to comment Share on other sites More sharing options...
Members gdoubleyou Posted May 4, 2014 Members Share Posted May 4, 2014 Carefully check your connections, iPad devices are not known for robust connections. Link to comment Share on other sites More sharing options...
Members MesaMonster Posted May 7, 2014 Author Members Share Posted May 7, 2014 I did everything you guys said and mysteriously, it is now working. Could have been a connection. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.