Members bloodxandxrank Posted April 2, 2011 Members Share Posted April 2, 2011 i wasn't sure if this should go in the effects section or this section. I figured since it is midi problems i'm having it's technically more "high tech" than just effects pedals... So I dug out my old FCB 1010 today determined to set it up for looper controls and possibly get some use out of the expression pedals. I put them both on the same channel and started programming my 1010. So far, it's failing. Here's a quick list of my settings on the FCB... (switch midi functions for the fcb 1010 are;sw1- program change 1sw2- program change 2sw3- program change 3sw4- program change 4sw5- program change 5sw6- control change 1sw7- control change 2sw8- exp pedal asw9- exp pedal bsw10/0- note) Switch #1 i'm using as Record/Overdub controls. In the "channel switching page" of the fcb i have switches 1, 6 and 7 active 1: #-506: #-50 Value-347: #-50 value 89 Switch one "works" but i have to tap it twice to record/overdub or stop recording/overdubbing Switches #3, 4, 6 and 7 have the same problem. When i tap them, nothing happens on the m13. Switch #3 - 1: #-36 (1/2 speed)Switch #4 - 1: #-85 (reverse)Switch #6 - 1: #-82 (undo/redo)Switch #7 - 1: #-80 (play once) Switches #8(pre/post effects) and #9(looper controls) seem to work perfectly. I have read and reread the FCB 1010 manual as well as the M13 advanced users manual, but cannot seem to find anything conflicting with what i have done. I put all of the right settings in the right place on the FCB 1010 and it still refuses to be controlled properly. The 1010 is not in direct select mode. I actually had is set up in direct select mode originally to play around with scene changing and it worked just fine. Can anyone out there help me out a little? I'm not exactly a MIDI genious. I'm 99% sure that it's an ID-10-t error on my behalf, but I'm at the end of the line. I have no more ideas on how to fix it. I feel i should also mention that the FCB1010 has the 2.5.1 chip upgrade. Link to comment Share on other sites More sharing options...
Members bloodxandxrank Posted April 3, 2011 Author Members Share Posted April 3, 2011 is anyone out there having similar problems with their m13? is it my controller? any ideas at all? Link to comment Share on other sites More sharing options...
Members bloodxandxrank Posted April 4, 2011 Author Members Share Posted April 4, 2011 any advice at all on setting this rig up? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.