Jump to content

tsl 100 5-way footswitch


puya88
 Share

Recommended Posts

  • Members

I couldnt find a replacement switch either that fit the same size. I capped off the old holes (little plastic cap thigns, the technical term escapes me), drilled some new holes and wired in switches that were larger than the originals. I had to make standoffs for the circuit board so it wouldnt touch the footswitch case's inside.

The switches i used are the normal 3 connector spst switch, but these are much heavier duty than stock. They are the switches for gas/brake on forklifts, so they are designed for long term, hard usage with lots of dirt/etc.

The new switches are on the opposite side of the lights on the top half of the footswitch. I didnt have switches to replace the fx and reverb, so i'm hoping those switches dont crap out on me.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...