Members jcn37203 Posted November 14, 2005 Members Share Posted November 14, 2005 http://seymourduncan.com/products/telesdescr.shtml#VintageLeadStack Also, the picture... That looks like a 4-conductor lead. Does that mean it's splittable? Anyone ever used one? Talkin' 'bout the lead model. Link to comment Share on other sites More sharing options...
Members GuyaGuy Posted November 14, 2005 Members Share Posted November 14, 2005 Originally posted by jcn37203 http://seymourduncan.com/products/telesdescr.shtml#VintageLeadStack Also, the picture... Is the Seymour Duncan STK-1 a humbucker? yes/no. it's a stacked HB but one coil is a dummy that basically bucks the hum but doesn't pickup. sorta like a "slave" pu. Originally posted by jcn37203 That looks like a 4-conductor lead. Does that mean it's splittable? no. 2 for the slave coil, 2 for the standard. Originally posted by jcn37203 Anyone ever used one? yes. but not me. (har har.) kinman's supposed to be the best of all of those stacked PUs--especially for vintagey tones, Link to comment Share on other sites More sharing options...
Members jcn37203 Posted November 14, 2005 Author Members Share Posted November 14, 2005 Originally posted by GuyaGuy yes/no. it's a stacked HB but one coil is a dummy that basically bucks the hum but doesn't pickup. sorta like a "slave" pu. no. 2 for the slave coil, 2 for the standard. yes. but not me. (har har.) kinman's supposed to be the best of all of those stacked PUs--especially for vintagey tones, So wiring it to "split" would do what? Turn it off? Have no effect? Link to comment Share on other sites More sharing options...
Members GuyaGuy Posted November 14, 2005 Members Share Posted November 14, 2005 Originally posted by jcn37203 So wiring it to "split" would do what? Turn it off? Have no effect? it would split the "slave" coil and the hum-cancelling would be cancelled. you could wire it to turn it off--essentially a kill switch. here's the basic SD schematic: http://www.seymourduncan.com/support/schematics/tele_lead_stack.html the red and white wires connect the 2 coils. green is ground. black is hot. there's a top coil, which is the functional coil, and the slave below. the slave is reversed wound and on the bottom. essentially, the slave's signal is bled to ground. Link to comment Share on other sites More sharing options...
Members riffdaddy Posted November 14, 2005 Members Share Posted November 14, 2005 In case you're wondering, the purpose of the kill switch is to replenish more of the pure single coil tone. The dummy coil will take away from the sound a little bit, but the tradeoff is worth it in live performance situations. In the studio, however, it's nice to have the option to turn it off. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.