Jump to content

Painting home made effects.


Recommended Posts

  • Members

This is a pedal that I built using an aluminum(?) Hammond box.

DSC01713.jpg

I just used some Testors model spray paint and some Krylon poly clear coat. The clear coat seemed to dull the finish a little. Do I even need a clear coat or is there a primer/paint combo that I could use that won't scratch or chip easily?

Link to comment
Share on other sites

  • 4 years later...
  • Members

they are different kinds of spray clear. different levels of shinyness, and its usually written somewhere on the can. gloss, semi gloss, matte

I use a single coat of epoxy resin. works liek a charm, but very messy and a little expensive.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...