Members orourke Posted April 2, 2006 Members Share Posted April 2, 2006 The manual says if I want to use the SAG function the I should turn the switch to the "ON" postition. It's not a switch is a freakin' knob. I suppose what the mean is to turn the knob from right to left, like a volume knob being turn up - which should make the voltage go down. These Voodoo Lab people are not very clear on this. Anyone know for sure? I've tried turning the knob but I can't tell much of a difference at the bedroom volume I have to use right now. At rehearsal it might be more apparent. I just wanna know for sure. Link to comment Share on other sites More sharing options...
Members Arjae Posted April 2, 2006 Members Share Posted April 2, 2006 You need to move the little dip switch to the on position in order for the knob to do the sag. Link to comment Share on other sites More sharing options...
Members BluesRock Posted April 2, 2006 Members Share Posted April 2, 2006 Originally posted by Arjae You need to move the little dip switch to the on position in order for the knob to do the sag. Yep. The little white ones on the bottom of the unit. Link to comment Share on other sites More sharing options...
Members orourke Posted April 3, 2006 Author Members Share Posted April 3, 2006 o.k. got it, thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.