Members rocknrao Posted April 3, 2006 Members Share Posted April 3, 2006 ...will not power a Boss DD-3 pedal. Well, to be exact, it will power it up, but the pedal will not operate. thank you. Link to comment Share on other sites More sharing options...
Members daver Posted April 3, 2006 Members Share Posted April 3, 2006 800ma will screw your pedal up... boss says to use 9.6v 300ma but im pretty sure 9v wont do any harm at least thats what they tell me try this...i felt stupid for not doing it earlier go to a thift store (usually i go for wacky clothes, not gear) and look at the appliance section, there are a bunch of power supplies lying around it there...i found two 300ma 9v adapters for a buck each Link to comment Share on other sites More sharing options...
Members rocknrao Posted April 3, 2006 Author Members Share Posted April 3, 2006 I'll give it a try. Thanks. Link to comment Share on other sites More sharing options...
Members fusionid Posted April 3, 2006 Members Share Posted April 3, 2006 wait no amps dont matter. They must be more than the specified by the pedal but I think it should work. It sounds like the problem is more like + or - inverted. Or even worse DC not AC. check those 2 last things match cuz I have a feeling thats whats going on Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.