Jump to content

I ordered a new guitar.


Recommended Posts

  • Members

It is a Nathan Sheppard ( www.nathansheppardguitars.com ) Singlecut - not yet on the website, but looks like THIS, shapewise.

 

Specs are:

 

Body = Alder

Neck = Wild Maple and Walnut 5-ply

Figerboard = Cocobola

Fingerboard Binding = Brazilian Rosewood (invisible against the Cocobola)

Frets: Medium/tall stainless steel

Earvana compensated nut

Inlay = MOP dots, 5th, 12th, 17th fret between the E and A strings

Pickups = BareKnuckle/NS Knuckledusters

Finish = Metalic blue/teal with a matching headstock

Tuners = Gotoh 510 locking

Controls = Volume, No-Load tone, 3-way pickup switch and 4-way rotary controlling the humbucker splits

Bridge = Wilkinson with Tremsetter

 

 

Should be done in September. The pickups are effectively two Tele neck pickups (one RWRP) built together as a humbucker, and two Tele bridge pickups (again, one RWRP) built together as a humbucker.

Link to comment
Share on other sites

  • Members

I like this idea of using two singlecoils making a humbucker. In stead of the humbucker with split coils. Probably the same. I have a godin radiator that sounds real nice withe the 2 singles together. I'm thinking about adding a single just next to the bridgepickup.

A telebridgePU has a large plate underneath. Is your pickup built as one pickup with one large plate?

Link to comment
Share on other sites

  • Members

Originally posted by Nico de Roode

A telebridgePU has a large plate underneath. Is your pickup built as one pickup with one large plate?

 

 

I honestly don't know. The builder says it's built like two tele pickups wodged together, which would imply that each has its own plate, but I'm not really sure.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...